Septic Cleaning in Bellingham WA
Fixing or replacing your leach field can be a very expensive project. If you are searching for a septic tank cleaning company near you and you live in Whatcom County, then consider Quality Septic for the job. Give us a call to prevent your leach field from being damaged. Ask about our septic pumping and cleaning services from AA Quality Septic. We’ll ensure that your septic system stays in top shape in all Whatcom County areas including Bellingham, Ferndale, Blaine ,Birch Bay and Lynden, WA
Septic tank cleaning means you need our septic pumping service. These 2 terms are interchangeable and usually refer to the same service. We have the equipment and the experience to get this done quickly and put your system back in service.
Request Quote
Our Quality Septic Cleaning Service
You can count on our crew to handle more than just septic tank installation and repair services. Our professionals have decades of experience providing these septic services.
- Septic tank cleaning/pumping – to protect your drainage system from clogging, you should pump out your system regularly
- Side sewer services – if you’re constructing a new building or neighborhood, trust us to hook up your sewer system and perform ongoing maintenance and repairs.
- Septic tank excavation services – when you install your septic tank, excavate the area to pump it properly and provide enough room to hold water and waste.
Signs of Septic System Failure
A septic system has 2 parts: A tank and a drainfield. Over time (typically 2 to 4 years, depending on usage capacity), a buildup of solids may occur. This can lead to septic tank overflow, clogging and blockages in your property’s drainfield.
If you see any of the following call us for service!
- Slow-draining sinks, toilets, or showers
- Wet or mushy ground over the septic drainfield
- Green, lush grass over the drainfield
- Strange odors in your yard
- Unusual gurgling sounds from drains
- Unexplained patches of standing water in your yard
360-410-0815
Septic Cleaning/Pumping Procedure
- The first step is find the septic tank access lids and open them
- To pump out the septic tank, a large hose from the vacuum truck is connected to the tank, and the contents of the tank are pumped out.
- Once the tank has been pumped out, the interior of the tank needs to be washed out.
- The technician will then inspect the tank for any damage. They will also check the baffles and the inlet and outlet pipes.
- Once the inspection is complete, the access lids will be closed. The technician will make sure that the lids are properly sealed.